How do I use a .bsg file?

Inline 6 template (High RPM)

uploaded by oziboy 1 month ago

Inline 6 template with perfect piston distance

Ended up freezing the cogs like @bunnybunnyrun said... didn't even know this was possible :l

This is not going to ruin the timing at some point like the other cog design
posted by Roycehellion 1 month ago
Ha! That's funny. I just made a car running on a straight six. Hit 14 units per second.
posted by Roycehellion 1 month ago
Btw that's not a pic of an I6
posted by oziboy 1 month ago
I uploaded this quickly because I had to get the barbeque going haha

I'll re-upload it later with the right picture

But it is the i6 right?
posted by Roycehellion 1 month ago
Yeah, its an I6. The throw is only half a block though. Its hard to make power with that little torque. I built an engine yesterday running on that and it was really weak.
posted by Roycehellion 1 month ago
Runs super high RPM, like my 1/2 block throw engine did. Its crazy! I got it in a car with 8:1 output ratio up to 8-9 units per second. Not bad!
posted by oziboy 1 month ago
I know, it was originally 1 block throw but I started getting issues with lining it up on the suspension, besiege didn't want to grab it
posted by Roycehellion 1 month ago
Yeah, its makes engien fast as hell though!

Heres the car i ran it with.
posted by oziboy 1 month ago
That dramatic end haha

What am I with a fast engine if it can deliver the power of what even one of those peasants would be able to stop

I made a car out of the same inline 6 as this build, velocity counter shows about 15 and 16 meter per sec

Then again the pistons aren't driven, but the cogs were directly driven by steam, giving me enough power and speed, and I coupled 2 of these engines to each other to correct the gyroscopic effect it has

It's shit, simply, and I cheated, but it works, and it also makes the entire creation lighter (it'll fly if it's zero G)
posted by Roycehellion 1 month ago
Yeah, that was a nice end to a quick build. Most my latest builds dont need to slammed to the ground, i just do that for fun ^_^ (my i6 car starts from a stop, no problem and so did the one i built from your i6)

Using a turbine is always a cheat, but it works. ;)

posted by oziboy 1 month ago
It's a cheat and it doesn't satisfy me

Just like the RTC system people use (grrrr, I made so many ones that are way better in steering, they don't even wobble!)

With slam to the ground I mean the water cannon glitch, when it's connected to a block in front of it it goes in the wrong direction, resulting in some engines (unless you use a turbine) to slam into the ground by themselves, causing immense unnecessary drag

Your recent ones are good tho