How do I use a .bsg file?

Small Braces/Gears Tutorial

uploaded by Roycehellion 1 year ago

Ive had a lot of people ask over the last year how i connect braces so small to other parts. In short, lots of experimenting, but ive pretty much got it down to a science now. Heres how i do it easily and quick.

I did this at work so its not my smoothest, but still, should dhow anyone how to do this.
*If you are using half scale (.5, .5, .5) then you only need to move about .25 units if you braces are also half scale.

posted by Roycehellion 1 year ago
Another note, ballasts and home block do not care where the brace is, they can be buried inside them and still hold just fine. That will save a lot of effort of moving the block first then the brace etc...
posted by Druggernaut127 1 year ago
Great tutorial thanks a million I see it works more on using a general size scale coz i ran into the mistake of using different scaling sizes.
posted by Roycehellion 1 year ago
Yeah, i almost always run the same ratio of sizing. You mix and match, but you have to know exactly where blocks mate. It just depends on the blocks too. Some get really weird, other couldnt care less.