Dzytizz's Uploads

Recent Comments

posted by Roycehellion 1 week ago on 2-Way To 1-Way Rotation Conversion Mechanism
nicely done!!!
posted by Dzytizz 1 month ago on 2-Way To 1-Way Automatic Rotation Conversion Mech
Thanks ^^
posted by oziboy 1 month ago on 2-Way To 1-Way Automatic Rotation Conversion Mech
Looks pretty good!
posted by Dzytizz 1 month ago on Completely Automatic CVT
There's always space for improvements though ^^

posted by oziboy 1 month ago on Completely Automatic CVT
Oh damn, I wanted to make this but I see you beat me to it
posted by oziboy 1 month ago on Automatic CVT W\ Slow-High Speed Priority Changer
Quite nice, I still don't understand how this even works the way it does

Putting a differential is the worst thing that can be done in a transmission unless there is a manual or electronically controlled way to spar it, if a wheel locks (like in my creation) every bit of torque will be lost in that differential

But I digress, well done, this looks way better

And about the high speed part, it's basically waste of resource when it's turned off, and when it's turned on it participates in the issue I mentioned above.
The issue can be avoided if you lock this part while not using it by sparring the "high speed part" of the differential or really any gear that's connected to it so that it doesn't turn
That'll maintain the torque

The system is stackable though, which is nice for more gears, but besiege is lacking in terms of gears
posted by Roycehellion 2 months ago on Mini 3 Speed Car With Open Diff And RTC Steering
just made my first creation in month on besiege....a 3 speed car with rtc, no rear diff, but it runs a "diff" planetary gear for transmission.
https://www.youtube.com/watch?v=fVI_5_hrO0o

I have a 5 speed in process too (4up, 1 rev)
posted by Roycehellion 3 months ago on Smallest (Possibly) 3 Speed Transmission
Def not smallest, but neat event still! :)
posted by Orz_PX 3 months ago on Vanilla Variable LSD(Limited Slip Differential) V2
Almost there, keep it up!
posted by Orz_PX 3 months ago on Vanilla 4x4 With 3 Variable Limited Slip Diffs
haha no problem. you did a good job here already.
posted by Dzytizz 3 months ago on Vanilla 4x4 With 3 Variable Limited Slip Diffs
Thanks for your comment. In theory, you're right, can't deny what you said here. This differential shouldn't be called LSD (it's more likely a combination of welded and open diff with variable slipage) because a real geared LSD uses clutch pads or viscious fluids to constantly limit the maximum difference between the two spining shafts while this differential becomes pretty much rigid(or locked) at set value of slipage (the thing that ropes does) and that makes it work unrealisticly ^^. But looking at the bright side, it's completely vanilla and making it with clutch pads would take huge amount of space. Well all I can say, I'm sorry if I dissapointed you, my bad for not giving enough information in decription, peace ^^
posted by Orz_PX 3 months ago on Vanilla 4x4 With 3 Variable Limited Slip Diffs
In theory, your LSD's working logic is not right.
A LSD should encourage small wheel speed difference, ie when turning, and lock it up when one wheel loses traction, ie the speed difference is big.
Yours, when ropes are not tightened, is an open diff, that's ok.
But once it is tightened, it does not encourage small speed difference (cuz the ropes are pulling) and once the speed difference is big enough for the rope to handle, it becomes an open diff, which loses the whole point of limiting slip.
posted by oziboy 4 months ago on Vanilla Variable LSD (Limited Slip Differential)
It kinda loses grip if you do it like this

I should come up with something too but I'm still pondering on it
posted by Dzytizz 4 months ago on Modded Car W 6 Speed(2 range3 speed) Transmission
Yeah it's RWD and has live axle in rear while independent suspension is in front ^^
posted by Vinarco 4 months ago on Modded Car W 6 Speed(2 range3 speed) Transmission
sorry i thought that was the front
posted by Vinarco 4 months ago on Modded Car W 6 Speed(2 range3 speed) Transmission
that's not an independent suspension
posted by oziboy 4 months ago on Vanilla V8 Steam Powered Engine
Wait until you see my automata though
posted by Dzytizz 4 months ago on Vanilla V8 Steam Powered Engine
Ty ^^
posted by oziboy 4 months ago on Vanilla V8 Steam Powered Engine
Cool
posted by Dzytizz 4 months ago on Steam Powered Tank
P.S. In that photo these 2 powered cogs added are set with left/right for forward/backward
posted by Dzytizz 4 months ago on Steam Powered Tank
Thanks ^^. Actually I used the same idea of your mechanism in my tank with 3 speed transmission, just made it a little more compact. Also I've "modified" your tank with mine mechanism and here's a photo how more compact version of it would look if you care ^^: http://imgur.com/a/FQWD6
posted by The J 4 months ago on Steam Powered Tank
Nice. You should make one with a subtractor mechanism like this:

http://besiegedownloads.com/machine/28884
posted by Dzytizz 5 months ago on Steam Powered Tractor
Thanks ^^ Yeah got it but a bit too late, used 4 braces in next creation though.

posted by oziboy 5 months ago on Steam Powered Tractor
Nice build

For the connection between the motor and the wheels though, instead of 2 braces you should use at least 3, there's this thing where if the engine stalls it might turn the wrong direction if you use 2

Or you can use that to your advantage and make the tractor have a reverse gear

I like it though
posted by Dzytizz 6 months ago on Completely Automatic CVT
Thanks. Yeah I know that feeling too mate, Besiege physics are pain in the butt sometimes :D
posted by Roycehellion 6 months ago on Completely Automatic CVT
Nicely done. I have a setup just like this, but besiege kept breaking my chain and i got mad and quit. You can def scale down a lot of that and use some better mechanisms, but nicely done. Always liked the double cone CVT. kept waiting to get beaten to it.
posted by The J 6 months ago on Completely Automatic CVT
Well. Shit.
posted by Dzytizz 6 months ago on Vanilla Automatic 3 Speed System
Thanks ^^ Will try in near future.
posted by Dzytizz 6 months ago on Completely Automatic 4 Speed Gearbox
"Roycehellion" the inputs are located near the big gear attached to starting block ^^.
posted by The J 6 months ago on Completely Automatic 4 Speed Gearbox
The tachos of course, otherwise it'd act weird.